determine the height that the water level in the reservoir must be above the centre of the outlet pipe September 24, 2020 Read More »
how long will it take for the two water levels in the tanks to become equal? September 24, 2020 Read More »
what should be the dimensions and side slopes of the channel to obtain the maximum discharge? September 24, 2020 Read More »
Explain how it is possible for the flow at a particular cross-section in a channel to occur at two significantly different (alternate) depths of flow at the same discharge. September 24, 2020 Read More »
Determine by how much the depth of flow is increased by the weir at the weir. September 24, 2020 Read More »
Compare the chainages at which the upstream depth in the two questions first becomes 1.250m. September 24, 2020 Read More »
Design a single barrel, rectangular culvert that will operate with outlet control, following the general procedure and example given in the text. September 24, 2020 Read More »
If a broad crested weir has a coefficient of discharge, C, of 1.65, and if it completely spans a 17.4m wide rectangular channel, what would be the head over the weir when the discharge is 6.8m3 /s? September 24, 2020 Read More »
study the effect of altering the breakwaters at the entrance to a 150m wide river to allow the navigation of larger ships. September 24, 2020 Read More »
Define what is meant by the specific speed of (a) a turbine and (b) a pump. (c) A turbine is required to generate 5.5MW of electricity from the regulating releases from Kielder Water reservoir. September 24, 2020 Read More »