## what signal will actually be created by this interpolation process?

A signal x1(t) = 5 sin(20πt) is sampled at four times its Nyquist rate. Another signal x2(t) = 5 sin(2πf0t) is sampled at the same rate. What is the smallest value of f0 which is greater than 10 and for which the samples of x2(t) are exactly the same as the samples of x1(t)?  A signal x(t) = 4 cos(200πt) −7 sin(200πt) is sampled at its Nyquist rate with one of the samples occurring at time t = 0. If an attempt is made to reconstruct this signal from these samples by ideal sinc-function interpolation, what signal will actually be created by this interpolation process?

### Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

### Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

### calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….