indicate the type of change of state described by the specifications that follow, that is, indicate whether there is a change of state, whether it is induced or spontaneous, and whether or not the system is experiencing interactions.

If a system consists of a structure less particle in a fixed-volume container and has only two independent properties P1 and P2 , indicate the type of change of state described by the specifications that follow, that is, indicate whether there is a change of state, whether it is induced or spontaneous, and whether or not the system is experiencing interactions.

(a) the values of properties P1 and P2 are changing in time while two identical weights connected to the particle via two independent mechanisms are moving, one rising and the other falling at the same speed. the particle is connected to no other system in the environment.

(b) Same as in part (a), except that the values of properties P1 and P2 do not change in time.

(c)  Same as part (a), except that each weight has zero speed.

find the cost of your paper

Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….