## Find the range of exit pressures for which the duct exit flow is choked.

Room air is drawn into an insulated duct of constant

area through a smoothly contoured converging nozzle.

Room conditions are T 5 80

F and p 5 14:7 psia. The duct

diameter is D 5 1 in. The pressure at the duct inlet (nozzle

outlet) is p1 5 13 psia. Find (a) the mass flow rate in the duct

and (b) the range of exit pressures for which the duct exit

flow is choked.

*These problems require material from sections that may be omitted without loss of continuity in the text material.

778 Chapter 13 Compressible Flow

### Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

### Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

### calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….