Design a digital filter approximation to each of these ideal analog filters by sampling a truncated version of the impulse response and using the specified window.

Design a digital filter approximation to each of these ideal analog filters by sampling a truncated version of the impulse response and using the specified window. In each case choose a sampling frequency which is 10 times the highest frequency passed by the analog filter. Choose the delays and truncation times such that no more than 1% of the signal energy of the impulse response is truncated. Graphically compare the magnitude frequency responses of the digital and ideal analog filters using a dB magnitude scale versus linear frequency.

find the cost of your paper

Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….