Describe in as much detail as possible the steady-state error signal in response to a step excitation.

A continuous-time unity-gain (tracking) feedback system has a forward-path transfer function with exactly one pole at the origin of the s-plane. (a) Describe in as much detail as possible the steady-state error signal in response to a step excitation. (b) Describe in as much detail as possible the steady-state error signal in response to a ramp excitation. The transfer function of a continuous-time system has one finite pole in the open left half-plane at s =  s  0   and no finite zeros. If you wanted to make its response to a step excitation approach its final value faster, how would you change  s0  ?

find the cost of your paper

Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….