Daily Archives: April 12, 2021

create awareness and educate children between the age group of 10-14 years old in water resources and pollution control in Singapore through a video presentation.

As a member of a project team with the National Environmental Agency(NEA), you have have been given a project called “Water Technology and Our Life”. The objective of this project is to create awareness and educate children between the age group of 10-14 years old in water resources and pollution control in Singapore through a video presentation. Design a video with length of 5-8 min. The video should be entertaining and educational from the following topics minimum ONE topic or Maximum TWO topics in water technology.

a)Clarification Technology

b)Disinfection Technology

c)Desalination Technology

d)NEWater Technology

e)Wastewater Treatment Technology.

submit your proposal for the Week Five Virtual Conference.

Virtual Conference: Call for Posters

Effective clinical innovations and the dissemination of research findings are key elements in the growth and development of the psychology profession. There are numerous avenues that enable authors to publish and present their work. Poster presentations at conferences are effective methods for communicating research findings and providing opportunities to meet with other researchers and clinicians to discuss the research being presented. Thus, these types of conference presentations play a key role in the proliferation of research.

In this week’s discussion, you will be submitting your proposal for the Week Five Virtual Conference. You may utilize relevant assignments from previous courses in this program or suitable projects from your professional life. See the PSY699 Call for Student Poster Presentations document for specific parameters and instructions on….

Describe the actual measurement, or what should be measured (if you are describing a method). 

journal article in attachment

1-Briefly introduce the topic of the paper.  What is it, and why is it important?

2) Thermodynamic background / theory.  explain the equations that are applied

3) What is measured.  Describe the actual measurement, or what should be measured (if you are describing a method).

4) Comparison to data.  Either show how the thermodynamic principles introduced above have been compared to data, or discuss how they could be.  Make sure it is clear what thermodynamic information is determined.

5) Reflection.  Discuss the limitations in the cases the model can capture, the reasons for any deviations or limitations.  Are there ways that the model could be improved?

6) References. Provide references cited.  The primary source should be peer‐reviewed, and other journal articles or books can be used for support.  Provide the authors, article title,….

identify each malfunction before describing your observations.

 This assignment will take the form of a Zoom video. The video will consist of six parts; each involving a run of the simulator starting from the same steady state conditions. After starting each run, a different malfunction will be introduced. As the malfunction is progressively affecting the performance of the process you will observe both the graphics display and the historical trends and make observations as to exactly how the malfunction is affecting the ALL of the process values and systems. You should prepare at least one typed page for each malfunction run. On each page, identify each malfunction before describing your observations. Combine all pages together in a single Word document with your name, class and date and assignment title at the top of the first….

Calculate T out hot

A propane / propylene mixture consists of 95% propane that has a flow rate of 1.31083 kg/s is initially at 54.44 °C. By inserting it in the shell side of a cross-flow shell and tube heat exchanger with one fluid unmixed. The heat exchanger has two shell passes. There are 3020 tubes each one has a diameter of 1.905 cm and 5.6388 m long, contains quenched water at a flow rate of 3.402 kg/s with an inlet temperature of 85 °C. The overall heat transfer coefficient “U” is equal to 8.5637 w/m^2 * c

Consider Cpc = 3.2387 J/kg*C , and Cph = 4.2 J/kg*C. (Assume the mixture has properties of propane). Calculate:

1- T out hot

2- T out cold

3- q

Use a solver with LMTD….

determine the diameter and high of the carbon bed

Air at a flow rate 1.70 m2/h (16 oC, 1 atm) and containing 0.5 mol % ethylene acetate

and no water vapor is to be treated with activated carbon with an equivalent particle

diameter of 3.35 mm in the fixed bed adsorber to remove the ethylene acetate, which

will be subsequently stripped from the carbon by stream at 110oC. Based on the

following data given at Table 1 and 2 , determine

a) the diameter and

b) high of the carbon bed,

assuming the adsorption at 38 o C and 1 atm and a time to breakthrough of 8 h with

superficial gas velocity of 0.3048 m/s.

If the bed high to diameter is unreasonable, what change in design basis would you

suggest?

Air at a flow rate….

Write a 1 to 2-page typed, single-spaced highlight of the article.

Read the article by D. S. Sholl and R. P. Lively, “Seven chemical separations to change the world,” Nature, 2016, Vol. 532, pages 435-437. You can find this article in the files on Canvas.

Write a 1 to 2-page typed, single-spaced highlight of the article. This should not simply be a summary of the article. Rather, it should highlight some particular aspects you found interesting and explain why those interest you. Please make sure each paragraph contains a topic sentence. Remember to explain using stories or specific examples to keep your writing interesting. Remember that quoting specific facts or figures is much better than talking generically. For example, it is better to say ‘Transportation accounts for about 28% of energy consumption in the United States.’ than to say ‘Transportation….

Describe a clinical or research scenario that requires the use of a microscope.

Required Resources

Read/review the following resources for this activity:

Textbook: Chapter 3 Weekly Concepts Initial Post Instructions

Describe a clinical or research scenario that requires the use of a microscope. What microscope is the best choice for your scenario and why? What would be your second choice?

Make sure to post at least two high quality posts. Your instructor will open new topics of discussion throughout the week.

Follow-Up Post Instructions

Respond to at least one peer or the instructor. Further the dialogue by providing more information and clarification.

Writing Requirements Minimum of 2 posts (1 initial & 1 follow-up) Minimum of 2 sources cited (assigned readings/online lessons and an outside source) APA format for in-text citations and list of references

answer 1: 

Hello Professor and Class,

In….

Post your initial response to the discussion questions

Part 1 – Post your initial response to the discussion questions by Wednesday at 11:59 pm Part 2 – Post substantive feedback to two (2) classmates by Saturday at 11:59 pm

*To view the grading rubric for this discussion, click the name of the discussion, then click “Grading Information”Part 1: Discussion Board Post #3 (10 pts.)(Related to Project #3):Please attach a document to your thread that includes two things for Project #3 – Students will research a discourse community in which they are unfamiliar, beginning with secondary research and including an interview:(1) A short description of your discourse community, whom you plan to interview (do not mention specific names, simply describe their role in the community), and your research question (the focus of your research).(2) Five potential interview questions you….

submit the work once, your first submission is your final submission.

This assignment is worth maximum of 03% to be added to your final overall grade. The rules for this assignment, and the choice of topics are listed below: o The work must be type-written (word processed) with page margins set to 1 inches for all sides (top, bottom, left and right), text font as aerial, text size as 12, SINGLE LINE SPACED, and paragraphs are to be separated by a single line. No macros are to be used in the document. The paper must be 2-4 full pages long (this does not include your list of references). o At the top of the document include your name and then on the line beneath write the name of the disease you are writing about as the title. o The….